30B Conductive Carbon Black
Furnace conductive carbon black (30B/P: B = beaded/granular, P = powder; same published chemical specs). Oil absorption 130±15 ml/100g; iodine absorption 170±8 g/kg. TDS map: conductive/antistatic rubber and plastics only — not battery, cable, coatings, silicone or supercapacitor columns.
30B (printed as 30B/P on the family sheet) is a furnace-process conductive carbon black in the DLcarb conductive family. Suffix B means beaded / granular form and suffix P means powder form; both share the same published chemical specifications. Names that start with a number are furnace conductive blacks; names that start with SP are acetylene blacks — do not assume 30B inherits the acetylene application map. CAS No. 1333-86-4 · H.S. Code 2803000000 · general chemical grade. This page is a grade datasheet for 30B/P only. It is not a high-purity grade and it is not a tire N-grade. The 30B/P row does not publish a resistivity or iron figure, and this page does not invent either.
30B technical specifications
These values are taken from the DLcarb conductive and antistatic carbon black TDS (printed 3 August 2025), 30B/P row. They are specification ranges, not results from a single production lot.
| Technical specifications (TDS) | |||
|---|---|---|---|
| DLcarb Industry Co., Ltd | |||
| Product | Conductive carbon black | Grade | 30B/P |
| No. | Item | Unit | Specification |
| 1 | Oil absorption | ml/100g | 130±15 |
| 2 | Iodine absorption | g/kg | 170±8 |
| 3 | Heating loss | % | ≤1.5 |
| 4 | Ash content | % | ≤0.5 |
| 5 | pH | - | 7~9 |
Note: Figures above are TDS specification ranges for reference. Delivery specs follow the mutually confirmed technical agreement. Validate for your use case. Safety information: SDS (EU REACH).
The resistivity and metal-content (Fe) columns on this row are blank (printed as “-”), so this page does not fill in either figure. Published values are oil absorption 130±15 ml/100g, iodine absorption 170±8 g/kg, heating loss ≤1.5%, ash ≤0.5% and pH 7~9. On the same family sheet, 70B (oil absorption 200±15 ml/100g) and 80P (oil absorption 440~530 ml/100g) are the higher-structure furnace grades. This page does not invent a resistivity comparison: these furnace rows leave that column unpublished.
Where the TDS application map places 30B/P
The second page of that TDS marks 30B/P for the uses below, and only these (read by column alignment, not by copying an acetylene or higher-structure furnace row):
- Conductive rubber and antistatic rubber
- Conductive plastics and antistatic plastics
The map does not mark 30B/P for silicone, flooring, leather, extra-high-voltage cable shielding, cable water-blocking tape, coatings, inks, paints, foam, sponge, aerospace seals, high-pressure hoses, rubber rollers, sodium-ion, lithium-ion or solid-state batteries, cathode/anode slurries, dry batteries, lead-acid batteries, fuel cells, specialty ceramics, metallurgy, heat-tracing cables, glass beads, supercapacitors, tire bladders or thermally conductive materials. Plastics and antistatic packaging notes: conductive carbon black for plastics. A broader comparison sits in our conductive carbon black selection guide.
Questions buyers usually ask
Is 30B an acetylene grade?
No. On the family TDS, names that start with a number are furnace conductive blacks. Names that start with SP are acetylene blacks. 30B/P does not inherit the acetylene application map.
Is 30B the same as 70B or 80P?
No. All three are furnace conductive grades on the same sheet, but the published oil absorption is lower for 30B/P (130±15 ml/100g) than for 70B/P (200±15 ml/100g) and 80P (440~530 ml/100g). 70B and 80P remain the higher-structure furnace grades in this family. None of these rows publishes a resistivity or iron figure, so this page does not compare those fields.
Does 30B have a published resistivity or iron figure?
No. Those columns are blank on the 30B/P row. This page does not invent either number.
What do the B and P suffixes mean?
B is the beaded / granular form and P is the powder form. The published chemical specifications on this row are the same for both.
Documents and storage
Alongside the TDS we publish an EU REACH SDS for carbon black (CAS 1333-86-4) and three SGS reports dated 26 June 2026 on a submitted carbon black sample: REACH Candidate List SVHC screening (253 substances, results ≤0.1% w/w, plus one potential SVHC also ≤0.1% w/w); EU RoHS Directive (EU) 2015/863 amending Annex II to 2011/65/EU (Pass); and halogen testing to IEC 62321-3-2:2020 (fluorine, chlorine, bromine and iodine reported ND on that sample; MDL 20 mg/kg for F and 50 mg/kg for Cl, Br and I). Those reports describe the submitted sample — they are not a substitute for the grade TDS or a lot COA. 30B/P is not named as its own model number on the SDS service summary; treat the SDS as the carbon-black document for this chemistry and ask us if your file needs a model-level confirmation.
Downloads: Conductive & antistatic TDS (PDF) · SDS — EU REACH (PDF) · REACH SVHC screening (PDF) · RoHS report (PDF) · Halogen report (PDF)
The TDS storage note is the same across these sheets: keep the material in a cool, dry, well-ventilated warehouse; protect it from moisture; guard against dust inhalation and skin contact; store it apart from strong oxidants and do not mix-store. For classification and safe handling, follow the SDS rather than the short TDS footnote. MOQ and Incoterms are not published here.
Request a sample or quote · Sample & export · SDS, specs & export documents · How to choose a supplier
Last updated: November, 2026
Key features
- Furnace conductive grade (B = beaded/granular, P = powder; same published chemical specs)
- Oil absorption 130±15 ml/100g; iodine 170±8 g/kg; no published resistivity or Fe figure
- TDS map: conductive/antistatic rubber and plastics only — not battery, cable, coatings, silicone or supercapacitor columns
- Family conductive TDS, EU SDS and June 2026 SGS sample reports