Pigment Carbon Black for Plastics Masterbatch

For plastics masterbatch coloration, start from the pigment TDS columns that are actually marked for plastics and masterbatch — on this site that discussion begins with P1550, not with a conductive grade.

Pigment carbon black for plastics masterbatch is a coloration job: jetness, undertone, tinting strength and how completely the grade opens in a carrier resin. It is not the same brief as a resistivity window. On the published DLcarb pigment TDS (printed 3 August 2025), furnace grade P1550 (printed as P1550B/P) is marked for plastics, plastic goods and masterbatch. Channel grade C111 is marked for water-based, solvent-based and powder coatings and is not marked for plastics or masterbatch. If the real need is conductivity rather than color, go to conductive masterbatch and percolation instead of forcing a pigment row to carry ohms.

What to lock before a color trial

ItemWhy it matters
Visual target (jetness, undertone, hiding)Prevents comparing grades under different film thickness or lighting
Carrier resin and masterbatch concentrationWetting and secondary dispersion in PE, PP, PS or ABS are not identical
Process window (screw, pelletizing temperature)Poor opening shows up as specks, weak jetness or delayed coloring
Weatherability or outdoor exposure, if anyOutdoor parts should not chase laboratory jetness extremes alone

Processing notes: carbon black dispersion and masterbatch processing. Coatings and inks remain a separate cluster: dispersion and jetness in coatings and inks. How to read the published tinting-strength minima, and how to judge undertone when the sheet does not print one, is on tint strength and undertone in pigment carbon black.

Published pigment rows

GradePublished figuresMap notes
P1550Furnace pigment (B = beaded, P = powder). Oil absorption 50±3 ml/100g; iodine 175±8 g/kg; tinting strength ≥128%; pH 7~9; heating loss ≤1.5%; ash ≤0.5%; 45 μm sieve residue ≤50 ppmMarked for plastics, plastic goods, masterbatch, water-based systems, sponge, sealants and epoxy. Not marked for solvent-based coatings or powder coatings.
C111Channel pigment. Oil absorption 100±10 ml/100g; iodine-column figure 200±20 (specific surface area on channel grades); tinting strength ≥130%; pH 2.5±1Marked for water-based, solvent-based and powder coatings. Not marked for plastics or masterbatch.

Is a higher iodine number always a better masterbatch black?

No. What converters see is jetness, undertone and surface state after dispersion. P1550’s published iodine figure is 175±8 g/kg; that is one row on a sheet, not a promise that a higher number will look blacker in your carrier.

Why not start plastics coloration with C111?

Because the published map does not mark C111 for plastics or masterbatch. C111 is the coatings conversation on this site. Use it when the system matches a checked coatings column.

What if the same masterbatch also has to be antistatic?

Treat conductivity as its own primary intent. See the conductive masterbatch page linked above rather than blending two scoring systems in one trial plan.

Request a sample or quote · Sample & export · phone / WhatsApp +86 150-8314-1412

Last updated: November, 2026

← Back to solutionsView product linesWhatsAppCompliance & documents