SP150-Li Conductive Carbon Black

Acetylene conductive grade with a battery-oriented TDS row. Oil absorption 240~280 ml/100g; iodine 85±10 g/kg; resistivity ≤0.25 Ω·cm; Fe ≤30 ppm. Map: Li-ion, Na-ion, solid-state batteries and fuel cells only.

SP150-Li is an acetylene-process grade in the same SP series as SP150 and SP100B. The “Li” suffix on the TDS marks it as a battery-oriented row: tighter heating-loss and ash limits than SP150, and a published iron limit. CAS No. 1333-86-4 · H.S. Code 2803000000 · general chemical grade. Fitness for any cell chemistry still has to be proven in your own electrode and process work — the TDS is a screening sheet, not a cell qualification. This page is a grade datasheet for SP150-Li only. It is not a high-purity specialty grade.

Published specifications for SP150-Li

These values are taken from the DLcarb conductive and antistatic carbon black TDS (printed 3 August 2025), SP150-Li row. They are specification ranges, not results from a single production lot.

Technical specifications (TDS)
DLcarb Industry Co., Ltd
ProductConductive carbon blackGradeSP150-Li
No.ItemUnitSpecification
1Oil absorptionml/100g240~280
2Iodine absorptiong/kg85±10
3Heating loss%≤0.30
4Ash content%≤0.20
5pH-9.0±1.5
6ResistivityΩ·cm≤0.25
7Iron (Fe)ppm≤30

Note: Figures above are TDS specification ranges for reference. Delivery specs follow the mutually confirmed technical agreement. Validate for your use case. Safety information: SDS (EU REACH).

Published values are oil absorption 240~280 ml/100g, iodine absorption 85±10 g/kg, heating loss ≤0.30%, ash ≤0.20%, pH 9.0±1.5, resistivity ≤0.25 Ω·cm and Fe ≤30 ppm. SP150 publishes a wider heating-loss and ash cap (each ≤0.50%), the same resistivity ceiling, and no iron figure. This page does not invent figures beyond the printed SP150-Li row.

Battery and fuel-cell uses on the TDS map

The application map marks SP150-Li for four lines only:

  • Sodium-ion batteries
  • Lithium-ion batteries
  • Solid-state batteries
  • Fuel cells

It does not mark SP150-Li for cathode or anode slurries, dry batteries, lead-acid batteries, specialty ceramics, silicone, rubber, coatings, plastics, cable compounds, flooring or the other columns on that sheet. Neighbouring acetylene grade SP150 is not marked for the lithium-ion, sodium-ion or solid-state columns. Furnace grade 50B is marked for lithium-ion and solid-state batteries, slurries, dry and lead-acid batteries, fuel cells and specialty ceramics, but not for sodium-ion batteries, and that row publishes no resistivity or iron figure. Electrode-context reading: EV battery and energy storage. A broader comparison sits in our conductive carbon black selection guide.

Questions buyers usually ask

Is SP150-Li the same as SP150?

No. They sit on the same family sheet but the application map marks different columns. SP150-Li is the battery-oriented Li-suffixed row. SP150 is not marked for the lithium-ion, sodium-ion or solid-state columns.

Is SP150-Li a high-purity specialty grade?

No. It is an acetylene conductive row with a published iron limit and a battery-oriented application map. That is not the same document as the dedicated high-purity sheets for 250G or C50. Use the page that matches the actual question.

How does SP150-Li differ from 50B for battery discussions?

They are not interchangeable. SP150-Li is an acetylene, Li-suffixed row with published resistivity ≤0.25 Ω·cm and Fe ≤30 ppm. 50B/P is a furnace row with no published resistivity or iron figure. On the application map, both are marked for lithium-ion batteries, solid-state batteries and fuel cells. SP150-Li is also marked for sodium-ion batteries, and not for slurries, dry cells, lead-acid batteries or ceramics. 50B/P is also marked for cathode and anode slurries, dry batteries, lead-acid batteries and specialty ceramics, and is not marked for sodium-ion batteries.

Does this page invent a tighter resistivity or iron figure?

No. The printed SP150-Li figures are resistivity ≤0.25 Ω·cm and Fe ≤30 ppm. This page does not substitute another row’s numbers.

Documents and storage

Alongside the TDS we publish an EU REACH SDS for carbon black (CAS 1333-86-4) and three SGS reports dated 26 June 2026 on a submitted carbon black sample: REACH Candidate List SVHC screening (253 substances, results ≤0.1% w/w, plus one potential SVHC also ≤0.1% w/w); EU RoHS Directive (EU) 2015/863 amending Annex II to 2011/65/EU (Pass); and halogen testing to IEC 62321-3-2:2020 (fluorine, chlorine, bromine and iodine reported ND on that sample; MDL 20 mg/kg for F and 50 mg/kg for Cl, Br and I). Those reports describe the submitted sample — they are not a substitute for the grade TDS or a lot COA. SP150-Li is not named as its own model number on the SDS service summary; treat the SDS as the carbon-black document for this chemistry and ask us if your file needs a model-level confirmation.

The TDS storage note is the same across these sheets: keep the material in a cool, dry, well-ventilated warehouse; protect it from moisture; guard against dust inhalation and skin contact; store it apart from strong oxidants and do not mix-store. For classification and safe handling, follow the SDS rather than the short TDS footnote. MOQ and Incoterms are not published here.

Request a sample or quote · Sample & export · SDS, specs & export documents · How to choose a supplier

Last updated: November, 2026

Key features

  • Acetylene-process SP series, Li-suffixed row
  • Oil absorption 240~280 ml/100g; iodine 85±10 g/kg; resistivity ≤0.25 Ω·cm; Fe ≤30 ppm
  • TDS application map: lithium-ion, sodium-ion, solid-state batteries and fuel cells only
  • Family conductive TDS, EU SDS and June 2026 SGS sample reports
← Back to productsView solutionsWhatsAppCompliance & documents