SP100B Conductive Carbon Black

Acetylene conductive carbon black (beaded / granular). Oil absorption 180~220 ml/100g; iodine 75±5 g/kg; resistivity ≤0.25 Ω·cm; Fe ≤30 ppm. TDS map: slurries, dry and lead-acid batteries, fuel cells, silicone, heat-tracing, EHV shielding, water-blocking tape, supercapacitors and related uses — not Li-ion / Na-ion / solid-state, rubber or plastics columns.

SP100B is an acetylene-process grade in our conductive carbon black family. On the family TDS, grades whose names start with SP are acetylene blacks; grades whose names start with a number are furnace conductive blacks. The same sheet describes acetylene grades as combining high purity and high conductivity with very low ash, metal-impurity and sulfur levels. The printed name is SP100B: suffix B means beaded / granular form. This row is not printed as a B/P pair. CAS No. 1333-86-4 · H.S. Code 2803000000 · general chemical grade. This page is a grade datasheet for SP100B only. It is not a high-purity specialty grade and it is not a tire N-grade.

SP100B technical specifications

These values are taken from the DLcarb conductive and antistatic carbon black TDS (printed 3 August 2025), SP100B row. They are specification ranges, not results from a single production lot.

Technical specifications (TDS)
DLcarb Industry Co., Ltd
ProductConductive carbon blackGradeSP100B
No.ItemUnitSpecification
1Oil absorptionml/100g180~220
2Iodine absorptiong/kg75±5
3Heating loss%≤0.30
4Ash content%≤0.20
5pH-8.0±1
6ResistivityΩ·cm≤0.25
7Iron (Fe)ppm≤30

Note: Figures above are TDS specification ranges for reference. Delivery specs follow the mutually confirmed technical agreement. Validate for your use case. Safety information: SDS (EU REACH).

Published values are oil absorption 180~220 ml/100g, iodine absorption 75±5 g/kg, heating loss ≤0.30%, ash ≤0.20%, pH 8.0±1, resistivity ≤0.25 Ω·cm and Fe ≤30 ppm. Neighbouring acetylene rows on the same sheet include SP150 (oil absorption 220~270 ml/100g; resistivity ≤0.25 Ω·cm; no published Fe figure) and SP150-Li (the Li-suffixed battery row). This page does not invent figures beyond the printed SP100B row, and it does not treat the three acetylene rows as interchangeable.

Where the TDS application map places SP100B

The second page of that TDS marks SP100B for the uses below, and only these (read by column alignment, not by copying the SP150 or furnace rows):

  • Cathode and anode slurries; dry batteries; lead-acid batteries; fuel cells
  • Specialty ceramics
  • Conductive silicone and antistatic silicone
  • Heat-tracing cables
  • Extra-high-voltage cable shielding compounds; cable water-blocking tape
  • Supercapacitors; thermally conductive materials
  • Tire bladders
  • Conductive rubber rollers

The map does not mark SP100B for sodium-ion, lithium-ion or solid-state batteries, metallurgy, conductive or antistatic rubber, antistatic floor coatings or flooring, leather, glass beads, conductive coatings, inks or paints, antistatic coatings, aerospace seals, conductive or antistatic plastics, foam, sponge, or antistatic high-pressure hoses. Heat-tracing is also marked on SP150; extra-high-voltage shielding and water-blocking tape are also marked on furnace grades such as 80P and 70B. Cable-construction reading: conductive carbon black for wire and cable. A broader comparison sits in our conductive carbon black selection guide.

Questions buyers usually ask

Is SP100B a furnace grade?

No. On the family TDS, names that start with SP are acetylene blacks. Names that start with a number are furnace conductive blacks. SP100B does not inherit a furnace application map.

Is SP100B the same as SP150?

No. Both are acetylene grades on the same sheet, but the published windows and the checked columns differ. SP100B publishes oil absorption 180~220 ml/100g, iodine 75±5 g/kg, Fe ≤30 ppm and resistivity ≤0.25 Ω·cm. SP150 publishes oil absorption 220~270 ml/100g and iodine 85±10 g/kg, with the same resistivity ceiling and no published Fe figure. Both are marked for heat-tracing cables, slurries, dry and lead-acid batteries, fuel cells, specialty ceramics, silicone, supercapacitors and thermally conductive materials. Only SP100B is marked for extra-high-voltage cable shielding, cable water-blocking tape, tire bladders and conductive rubber rollers. Only SP150 is marked for metallurgy, conductive and antistatic rubber, antistatic flooring materials and antistatic coatings. Neither row is marked for the lithium-ion, sodium-ion or solid-state columns — those belong to SP150-Li.

Does the map mark SP100B for conductive rubber or plastics?

No. Conductive and antistatic rubber, and conductive and antistatic plastics, are not checked on the SP100B column. Rubber and plastics discussions on this site start from the furnace rows that are actually marked, such as 80P, 70B and (for rubber and plastics only) 30B.

What does the B suffix mean?

B is the beaded / granular form. The family sheet prints this grade as SP100B, not as a B/P pair.

Documents and storage

Alongside the TDS we publish an EU REACH SDS for carbon black (CAS 1333-86-4) and three SGS reports dated 26 June 2026 on a submitted carbon black sample: REACH Candidate List SVHC screening (253 substances, results ≤0.1% w/w, plus one potential SVHC also ≤0.1% w/w); EU RoHS Directive (EU) 2015/863 amending Annex II to 2011/65/EU (Pass); and halogen testing to IEC 62321-3-2:2020 (fluorine, chlorine, bromine and iodine reported ND on that sample; MDL 20 mg/kg for F and 50 mg/kg for Cl, Br and I). Those reports describe the submitted sample — they are not a substitute for the grade TDS or a lot COA. SP100B is not named as its own model number on the SDS service summary; treat the SDS as the carbon-black document for this chemistry and ask us if your file needs a model-level confirmation.

The TDS storage note is the same across these sheets: keep the material in a cool, dry, well-ventilated warehouse; protect it from moisture; guard against dust inhalation and skin contact; store it apart from strong oxidants and do not mix-store. For classification and safe handling, follow the SDS rather than the short TDS footnote. MOQ and Incoterms are not published here.

Request a sample or quote · Sample & export · SDS, specs & export documents · How to choose a supplier

Last updated: November, 2026

Key features

  • Acetylene-process SP series (B = beaded / granular; not printed as a B/P pair)
  • Oil absorption 180~220 ml/100g; iodine 75±5 g/kg; resistivity ≤0.25 Ω·cm; Fe ≤30 ppm
  • TDS map: slurries, dry and lead-acid batteries, fuel cells, silicone, heat-tracing, EHV shielding, water-blocking tape, supercapacitors — not Li/Na/solid-state, rubber or plastics columns
  • Family conductive TDS, EU SDS and June 2026 SGS sample reports
← Back to productsView solutionsWhatsAppCompliance & documents