70B Conductive Carbon Black
Furnace conductive carbon black (70B/P: B = beaded/granular, P = powder; same published chemical specs). Oil absorption 200±15 ml/100g; iodine absorption 380±20 g/kg. TDS map: conductive/antistatic silicone, rubber, plastics, coatings, EHV cable shielding and related uses — not battery, heat-tracing or supercapacitor columns.
70B (printed as 70B/P on the family sheet) is a furnace-process conductive carbon black in the DLcarb conductive family. Suffix B means beaded / granular form and suffix P means powder form; both share the same published chemical specifications. Names that start with a number are furnace conductive blacks; names that start with SP are acetylene blacks — do not assume 70B inherits the acetylene application map. CAS No. 1333-86-4 · H.S. Code 2803000000 · general chemical grade. This page is a grade datasheet for 70B/P only. It is not a high-purity grade and it is not a tire N-grade. The 70B/P row does not publish a resistivity or iron figure, and this page does not invent either.
70B technical specifications
These values are taken from the DLcarb conductive and antistatic carbon black TDS (printed 3 August 2025), 70B/P row. They are specification ranges, not results from a single production lot.
| Technical specifications (TDS) | |||
|---|---|---|---|
| DLcarb Industry Co., Ltd | |||
| Product | Conductive carbon black | Grade | 70B/P |
| No. | Item | Unit | Specification |
| 1 | Oil absorption | ml/100g | 200±15 |
| 2 | Iodine absorption | g/kg | 380±20 |
| 3 | Heating loss | % | ≤1.5 |
| 4 | Ash content | % | ≤0.5 |
| 5 | pH | - | 7~9 |
Note: Figures above are TDS specification ranges for reference. Delivery specs follow the mutually confirmed technical agreement. Validate for your use case. Safety information: SDS (EU REACH).
The resistivity and metal-content (Fe) columns on this row are blank (printed as “-”), so this page does not fill in either figure. Published values are oil absorption 200±15 ml/100g, iodine absorption 380±20 g/kg, heating loss ≤1.5%, ash ≤0.5% and pH 7~9. On the same family sheet, 80P is the higher-structure furnace grade (oil absorption 440~530 ml/100g). This page does not invent a resistivity comparison: both furnace rows leave that column unpublished.
Where the TDS application map places 70B/P
The second page of that TDS marks 70B/P for the uses below (read by column alignment, not by copying an acetylene row):
- Conductive silicone and antistatic silicone; conductive rubber and antistatic rubber
- Antistatic floor coatings, antistatic flooring and antistatic flooring materials; conductive leather and antistatic leather
- Extra-high-voltage cable shielding compounds; cable water-blocking tape
- Conductive coatings, antistatic coatings, conductive inks and conductive paints
- Conductive plastics and antistatic plastics
- Conductive and antistatic foam; conductive and antistatic sponge
- Aerospace seals; antistatic high-pressure hoses; conductive rubber rollers
The map does not mark 70B/P for sodium-ion, lithium-ion or solid-state batteries, nor for cathode/anode slurries, dry batteries, lead-acid batteries, fuel cells, specialty ceramics, metallurgy, heat-tracing cables, glass beads, supercapacitors, tire bladders or thermally conductive materials. Plastics and antistatic packaging notes: conductive carbon black for plastics. Wire and cable notes: conductive carbon black for wire and cable. A broader comparison sits in our conductive carbon black selection guide.
Questions buyers usually ask
Is 70B an acetylene grade?
No. On the family TDS, names that start with a number are furnace conductive blacks. Names that start with SP are acetylene blacks. 70B/P does not inherit the acetylene application map.
Is 70B the same as 80P?
No. Both are furnace conductive grades on the same sheet, but the published oil absorption is lower for 70B/P (200±15 ml/100g) than for 80P (440~530 ml/100g). 80P remains the higher-structure furnace grade in this family. Neither row publishes a resistivity or iron figure, so this page does not compare those fields.
Does 70B have a published resistivity or iron figure?
No. Those columns are blank on the 70B/P row. This page does not invent either number.
What do the B and P suffixes mean?
B is the beaded / granular form and P is the powder form. The published chemical specifications on this row are the same for both.
Documents and storage
Alongside the TDS we publish an EU REACH SDS for carbon black (CAS 1333-86-4) and three SGS reports dated 26 June 2026 on a submitted carbon black sample: REACH Candidate List SVHC screening (253 substances, results ≤0.1% w/w, plus one potential SVHC also ≤0.1% w/w); EU RoHS Directive (EU) 2015/863 amending Annex II to 2011/65/EU (Pass); and halogen testing to IEC 62321-3-2:2020 (fluorine, chlorine, bromine and iodine reported ND on that sample; MDL 20 mg/kg for F and 50 mg/kg for Cl, Br and I). Those reports describe the submitted sample — they are not a substitute for the grade TDS or a lot COA. 70B/P is not named as its own model number on the SDS service summary; treat the SDS as the carbon-black document for this chemistry and ask us if your file needs a model-level confirmation.
Downloads: Conductive & antistatic TDS (PDF) · SDS — EU REACH (PDF) · REACH SVHC screening (PDF) · RoHS report (PDF) · Halogen report (PDF)
The TDS storage note is the same across these sheets: keep the material in a cool, dry, well-ventilated warehouse; protect it from moisture; guard against dust inhalation and skin contact; store it apart from strong oxidants and do not mix-store. For classification and safe handling, follow the SDS rather than the short TDS footnote. MOQ and Incoterms are not published here.
Request a sample or quote · Sample & export · SDS, specs & export documents · How to choose a supplier
Last updated: November, 2026
Key features
- Furnace conductive grade (B = beaded/granular, P = powder; same published chemical specs)
- Oil absorption 200±15 ml/100g; iodine 380±20 g/kg; no published resistivity or Fe figure
- TDS map includes conductive/antistatic silicone, rubber, plastics, coatings, EHV cable shielding — not Li-ion / Na-ion / solid-state, heat-tracing or supercapacitor columns
- Family conductive TDS, EU SDS and June 2026 SGS sample reports