50B Conductive Carbon Black
Furnace conductive carbon black (50B/P: B = beaded/granular, P = powder; same published chemical specs). Oil absorption 180±15 ml/100g; iodine absorption 75±8 g/kg. TDS map: lithium-ion and solid-state batteries, cathode/anode slurries, dry and lead-acid batteries, fuel cells and specialty ceramics — not sodium-ion, rubber, plastics, coatings or cable columns.
50B (printed as 50B/P on the family sheet) is a furnace-process conductive carbon black in the DLcarb conductive family. Suffix B means beaded / granular form and suffix P means powder form; both share the same published chemical specifications. Names that start with a number are furnace conductive blacks; names that start with SP are acetylene blacks — do not assume 50B inherits the acetylene application map. CAS No. 1333-86-4 · H.S. Code 2803000000 · general chemical grade. This page is a grade datasheet for 50B/P only. It is not a high-purity grade and it is not a tire N-grade. The 50B/P row does not publish a resistivity or iron figure, and this page does not invent either.
50B technical specifications
These values are taken from the DLcarb conductive and antistatic carbon black TDS (printed 3 August 2025), 50B/P row. They are specification ranges, not results from a single production lot.
| Technical specifications (TDS) | |||
|---|---|---|---|
| DLcarb Industry Co., Ltd | |||
| Product | Conductive carbon black | Grade | 50B/P |
| No. | Item | Unit | Specification |
| 1 | Oil absorption | ml/100g | 180±15 |
| 2 | Iodine absorption | g/kg | 75±8 |
| 3 | Heating loss | % | ≤1.5 |
| 4 | Ash content | % | ≤0.5 |
| 5 | pH | - | 7~9 |
Note: Figures above are TDS specification ranges for reference. Delivery specs follow the mutually confirmed technical agreement. Validate for your use case. Safety information: SDS (EU REACH).
The resistivity and metal-content (Fe) columns on this row are blank (printed as “-”), so this page does not fill in either figure. Published values are oil absorption 180±15 ml/100g, iodine absorption 75±8 g/kg, heating loss ≤1.5%, ash ≤0.5% and pH 7~9. On the same family sheet, 30B (oil absorption 130±15 ml/100g), 70B (oil absorption 200±15 ml/100g) and 80P (oil absorption 440~530 ml/100g) are the other published furnace grades. This page does not invent a resistivity comparison: these furnace rows leave that column unpublished.
Where the TDS application map places 50B/P
The second page of that TDS marks 50B/P for the uses below, and only these (read by column alignment, not by copying an acetylene or other furnace row):
- Lithium-ion batteries and solid-state batteries
- Cathode and anode slurries
- Dry batteries and lead-acid batteries
- Fuel cells
- Specialty ceramics
The map does not mark 50B/P for sodium-ion batteries, silicone, rubber, plastics, flooring, leather, extra-high-voltage cable shielding, cable water-blocking tape, coatings, inks, paints, foam, sponge, aerospace seals, high-pressure hoses, rubber rollers, metallurgy, heat-tracing cables, glass beads, supercapacitors, tire bladders or thermally conductive materials. Battery-context reading: EV battery and energy storage. A related acetylene battery row is SP150-Li — different process, a published resistivity and iron figure, and a narrower map. A broader comparison sits in our conductive carbon black selection guide.
Questions buyers usually ask
Is 50B an acetylene grade?
No. On the family TDS, names that start with a number are furnace conductive blacks. Names that start with SP are acetylene blacks. 50B/P does not inherit the acetylene application map.
Is 50B the same as 30B, 70B or 80P?
No. All four are furnace conductive grades on the same sheet, but the published oil absorption and iodine values differ, and so does the application map. 50B/P publishes oil absorption 180±15 ml/100g and iodine absorption 75±8 g/kg. 30B/P publishes 130±15 ml/100g and 170±8 g/kg; 70B/P publishes 200±15 ml/100g and 380±20 g/kg; 80P publishes 440~530 ml/100g and 330±40 g/kg. The 50B/P map is the battery, slurry, fuel-cell and specialty-ceramics columns listed above — not the rubber and plastics map used for 30B, and not the broader silicone, coatings and cable map used for 70B and 80P. None of these furnace rows publishes a resistivity or iron figure, so this page does not compare those fields.
How does 50B differ from SP150-Li for battery discussions?
They are not interchangeable. 50B/P is a furnace row with no published resistivity or iron figure. SP150-Li is an acetylene, Li-suffixed row with published resistivity ≤0.25 Ω·cm and Fe ≤30 ppm. On the application map, both are marked for lithium-ion batteries, solid-state batteries and fuel cells. 50B/P is also marked for cathode and anode slurries, dry batteries, lead-acid batteries and specialty ceramics; it is not marked for sodium-ion batteries. SP150-Li is marked for sodium-ion, lithium-ion and solid-state batteries plus fuel cells, and not for slurries, dry cells, lead-acid batteries or ceramics.
Does 50B have a published resistivity or iron figure?
No. Those columns are blank on the 50B/P row. This page does not invent either number.
What do the B and P suffixes mean?
B is the beaded / granular form and P is the powder form. The published chemical specifications on this row are the same for both.
Documents and storage
Alongside the TDS we publish an EU REACH SDS for carbon black (CAS 1333-86-4) and three SGS reports dated 26 June 2026 on a submitted carbon black sample: REACH Candidate List SVHC screening (253 substances, results ≤0.1% w/w, plus one potential SVHC also ≤0.1% w/w); EU RoHS Directive (EU) 2015/863 amending Annex II to 2011/65/EU (Pass); and halogen testing to IEC 62321-3-2:2020 (fluorine, chlorine, bromine and iodine reported ND on that sample; MDL 20 mg/kg for F and 50 mg/kg for Cl, Br and I). Those reports describe the submitted sample — they are not a substitute for the grade TDS or a lot COA. 50B/P is not named as its own model number on the SDS service summary; treat the SDS as the carbon-black document for this chemistry and ask us if your file needs a model-level confirmation.
Downloads: Conductive & antistatic TDS (PDF) · SDS — EU REACH (PDF) · REACH SVHC screening (PDF) · RoHS report (PDF) · Halogen report (PDF)
The TDS storage note is the same across these sheets: keep the material in a cool, dry, well-ventilated warehouse; protect it from moisture; guard against dust inhalation and skin contact; store it apart from strong oxidants and do not mix-store. For classification and safe handling, follow the SDS rather than the short TDS footnote. MOQ and Incoterms are not published here.
Request a sample or quote · Sample & export · SDS, specs & export documents · How to choose a supplier
Last updated: November, 2026
Key features
- Furnace conductive grade (B = beaded/granular, P = powder; same published chemical specs)
- Oil absorption 180±15 ml/100g; iodine 75±8 g/kg; no published resistivity or Fe figure
- TDS map: lithium-ion and solid-state batteries, cathode/anode slurries, dry and lead-acid batteries, fuel cells and specialty ceramics — not sodium-ion, rubber, plastics, coatings or cable columns
- Family conductive TDS, EU SDS and June 2026 SGS sample reports