High-Purity Carbon Black for Electronics & Battery Materials
When electronics or battery-adjacent materials need published cleanliness limits, compare 250G and C50 on their own TDS pages — and keep electrode conductive additives on a separate map.
High-purity carbon black for electronics and battery-adjacent materials is chosen when ash, metal impurities or trace elements may disturb electrical performance, catalyze side reactions or violate a customer specification. It is not the same question as “which conductive grade forms a network at the lowest loading.” Two dedicated sheets on this site are 250G and C50. A broader trigger list sits on when to choose high-purity carbon black. Electrode conductive additives follow a different published map — start with SP150-Li and EV battery and energy storage rather than treating a high-purity specialty row as a drop-in conductive agent.
What the two specialty TDS files actually say
Both sheets are dated 3 August 2025. The values below are specification ranges, not single-lot results, and delivery specifications follow the technical agreement we confirm with you.
| Grade | Published figures | Application sentence on that sheet |
|---|---|---|
| 250G | Iodine 75±5 g/kg; DBP 180±10 ml/100g; NSA 60~80 m²/g; heating loss 0.30 Max; ash 0.20 Max; 325-mesh residue 50 ppm Max; pH 7~9; no published Fe figure | Nitrides (such as aluminum nitride and silicon nitride), carbides, special ceramics, and conductive or antistatic rubber, plastics and silicone that need extremely high purity |
| C50 | Iodine 90±10 g/kg; DBP 180~260 ml/100g; NSA 65~80 m²/g; heating loss 0.30 Max; ash 0.20 Max; pH 7~9; Fe 20 ppm Max; produced by cracking high-purity gas raw materials; no sieve-residue row | Nitrides, carbides, special ceramics, and conductive or antistatic rubber and silicone with extremely high purity requirements. The sheet does not list plastics. |
Choose between them from those printed differences — the sieve-residue row and plastics mention on 250G versus the iron limit and gas-cracking note on C50 — then confirm with a sample. We do not invent a third, unpublished “electronics-only” grade on this page.
Keep electrode additives on their own map
The family conductive TDS marks SP150-Li for lithium-ion, sodium-ion and solid-state batteries plus fuel cells, and publishes Fe ≤30 ppm and resistivity ≤0.25 Ω·cm on that row. That is a conductive, battery-oriented acetylene line, not a substitute title for 250G or C50. Neighbouring SP150 is not marked for those three battery columns.
Does lower ash mean I can skip a conductive grade?
No. Ash and iron limits describe impurity risk. A conductive network still depends on structure, surface area and dispersion. Many projects negotiate a conductive grade and a purity requirement in parallel.
Can I use C50 in plastics because it is high-purity?
Not as a claim on this site. The C50 TDS does not list plastics; the 250G TDS does. If plastics cleanliness is the driver, start from the 250G sentence and validate in your formulation.
Is SP150-Li a high-purity specialty grade?
It is an acetylene conductive row with a published iron limit and a battery-oriented application map. That is not the same document as the dedicated 250G or C50 specialty sheets. Use the page that matches the question you are actually asking.
What should an RFQ include?
The host system (ceramic, polymer, electrode or other), which impurity limits matter, whether you already have a resistivity target, sample size, and which files you need (TDS, SDS, COA fields). Phone and WhatsApp: +86 150-8314-1412.
Request a sample or quote · Sample & export · SDS, specs and export documents
Last updated: November, 2026